Series

4

August 2020

LED Shop Lighting

Better lighting for finer work

To do good work in the shop, you need to see what you’re doing. While fluorescent tubes have long been the standard shop lights, new LED strip lights are brighter, more economical, last longer, and don’t flicker or hum.

8

August 2020

Gartside’s Centerboard Lugger

Old ways at work

Paul Gartside drew the inspiration for his Centerboard Lugger from British workboats of a century ago. With its traditional lapstrake hull and lug-yawl rig, it’s nearly identical to the boats of the past. The addition of a centerboard trunk is the only notable “upgrade” from the original.

5

August 2020

Hook Scrapers

Inexpensive and versatile

Hook scrapers are inexpensive tools that make themselves useful in building and renovating boats, whether shaving wood, smoothing cured epoxy, or removing old paint.

Small Boats Annual 2022July 2020

Built by the Book

David Parker's Paper Canoe

New Zealander David Parker was in the midst of strip-building a canoe when he decided to use its hull, still upside down on the strongback, as a mold for a canoe made of laminated paper. Paper boats were once hi-tech marvels, but that was in the last third of the 19th century.

July 2020

Impact Drivers

Power and finesse

Impact drivers may seem like tools for heavy work, but while they have a lot of screw-driving power, they can provide exceptional control and greatly reduce the number of screws that get damaged.

July 2020

High-Performance Foils

Shaping better centerboards and rudders

Sailors often look aloft to see if their sails are taking their best shape and getting the best performance from the wind. Builders of sailboats,too, should pay close attention to the shaping of a boat's rudder and daggerboard or centerboard. Alex Zimmerman explains NACA foils and the difference they can make.

July 2020

Antennas for VHF

An elevated accessory antenna can increase a handheld radio's range

Handheld VHF radios are very useful for communication from a small boat, especially in an emergency. Their height above the water determines their range and Ben Fuller covers more territory with his VHF by attaching it to an auxiliary antenna that's elevated on a pole.

Small Boats Annual 2021July 2020

A Solar Solo

Cruising the Rideau Canal

Phil Boyer takes a look back at his first fully solar-powered cruise. In SOL CANADA, a boat he built with a canopy covered with solar cells, he traveled 125 miles from Kingston, Ontario, to Ottawa, along a canal system that has been carrying boat traffic since 1832.

July 2020

Spira’s Hudson Skiff

An easy-to-build outboard skiff

The Hudson Skiff from Spira International is a simple 15-footer for outboard power. Typical of Spira designs, the skiff can be built with inexpensive common lumber by novice boatbuilders with modest woodworking skills and limited access to tools.

July 2020

Crawford’s Gunning Dory

A classic form in fiberglass

Crawford Boat Building is best known for their fiberglass Melonseed Skiff, but their Gunning Dory is equally able and attractive. The 15’ adaptation of a 19th-century Massachusetts predecessor has an appealing lapstrake appearance at a fraction of the weight.

June 2020

Unscrew-Ums

Extracting broken screws

Boatbuilders tend to drive a lot of screws whether they’re using bronze wood screws for traditional construction, stainless-steel screws for contemporary projects, or drywall screws for temporary use with epoxy-glued joints. When screws break off inside the wood, the Unscrew-Um can come to the rescue.

June 2020

Screw Pilot Bits

Fuller, Bosch, and Carbide & Diamond

Driving wood screws is faster and easier when you use a pilot bit that simultaneously drills holes for the screw’s threads and shank and the countersink for the head. We test pilot drills from Fuller, Bosch, and Carbide & Diamond and take a look inside the holes they make.

June 2020

A DIY Cart

14-inch wheels for rough terrain

When Ben Fuller acquired a new ice boat, he needed a cart to get it from his car and across rough terrain to the frozen waterways he sails. The DIY cart, built with 14” wheels, works well for kayaks, canoes, and other small boats.

June 2020

John Dory

Swampscott style in plywood

The John Dory is Iain Oughtred’s adaptation of a classic dory form for glued-lap plywood constriction. At less than half the weight of a traditionally built Swampscott, the John Dory offers time-tested seaworthiness with easy handling at the ramp and the beach.

June 2020

Downriver, Part 2

From St. Louis to the Mississippi Delta

In our March 2019 issue, David Hudson shared with us his adventure on the Upper Mississippi River and now he’s back with his row down the Lower Mississippi to its delta on the Gulf of Mexico. The river is bigger and so are the ships, the rafts of barges, and the sand bars.

June 2020

Bella 10

A breeze to build, a pleasure to row

Sam Devlin designed the Bella 10 to be built from a single 5x10 sheet of plywood, eliminating the need to scarf pieces together. The boat not only was well suited for the boatbuilding classes he was teaching, but also is an inexpensive project and an able rowing boat for the home boatbuilder.

June 2020

Simply Grand

Two grandsons team up with their grandfather

Two young brothers in Northwest Washington are lucky to have John Leyde as their grandfather. John, a steamboat enthusiast and serial boatbuilder, enjoys helping friends and family get afloat, so he made space in the workshop he built for a Devlin Bella 12, and he and the boys went to work.

Small Boats Annual 2022May 2020

A Kid-Built Curragh

Working with withies

Grade-school students in a Portland, Oregon, school are doing projects in woodworking class that are much more interesting than building birdhouses. Their teacher brought boatbuilding into the curriculum several years ago and the latest vessels launched are a coracle and a curragh, both built with locally harvested hazel-tree branches.

May 2020

Verksted Apron

A workshop time saver from Best Coast Canvas

The Verksted apron from Best Coast Canvas is thoughtfully designed for woodworkers and boatbuilders and beautifully made of durable natural materials. It goes well beyond keeping dust off your clothes; by keeping the tools you use most often on you, it makes your shop time more productive.

May 2020

A 3″ Bevel Gauge

A tool for tight corners

A boat’s complex combinations of curves and straight lines provides no end of odd angles. Sliding bevel gauges are standard boatbuilding tools, but there are a lot of places that they can’t fit. The 3” bevel gauge, made of brass and aluminum, is easily adjusted and excels in tight spaces.

May 2020

Joe’s Tool Tote

A master boatbuilder's tote, stool, and step

Joe Liener was a master craftsman who did a lot of work on small boats. He had a tote that carried his tools and served as a sawhorse, seat, and step stool. It would be as hand around the house as in the boatshop. Ben Fuller shows us the replica he built from materials he had at home.

May 2020

The Race to Alaska, Almost

Trailing the fleet, keeping up with the leaks

Thor Belle found an old Swampscott dory rotting away under a tangle of blackberry bushes and decided to make it seaworthy again. He and Pax Templeton did their best to put the boat back to rights and entered it in the 2019 Race to Alaska. They soon discovered that the dory wasn’t really up to the task, but they pressed on in spite of the difficulties.

May 2020

Laughing Gull

A working sharpie redesigned for exciting sailing

Arch Davis designed the Laughing Gull with youthful sailors in mind. The gunter-sloop rig had traditional roots but it had to provide plenty of power for exciting sailing, even planing downwind. And with youth being as they are, the boat had to recover easily from capsizes.

May 2020

Grumman’s 17′ Double-Ender

An enduring and durable classic

Grumman, renowned for making fighter planes during World War II, began making canoes as the war came to a close in 1945. The same care that went into aircraft went into the canoes, and the tooling and jigs that were created at the beginning are still in use. Grumman’s 17’ Double Ender is a classic that still serves paddlers 75 years after it first went into production.

Small Boats Annual 2021April 2020

Carolinian Carolina Dory

An outboard skiff from Spira

Boats built to plans from Spira International are designed for readily available lumber and plywood and modest woodworking skills. The Carolinian design is no exception and produces an easily driven and versatile outboard skiff.