2017 Nauset Marsh Skiff

For Sale- Nauset Marsh Skiff custom built in 2017. This beautiful NMS is for sale due to the owner’s declining health.

Specifications and custom options include:

LOA – 16′

Beam – 5′6″

Draft- 5″

Weight – 450 lbs.

Materials – Bottom – 1/2″ Meranti Marine Plywood

Topsides – 3/8″ (9mm) Okoume Marine Plywood

Transom- inside layer, 3/8″ Meranti M/ply, core Eastern white cedar,outside layer 3/8″ Sapelli Marine Plywood

Epoxy – MAS. Exterior of hull and inside bottom sheathed with epoxy and 6 oz. fiberglass cloth transom exterior sheathed with epoxy and

4 oz. cloth. Interior and side decks coated 2 coats epoxy.

Fastenings – Bronze, stainless steel

Paint – Bottom- Pettit Hydrocoat red #1640

Oil-Deks Olje #1- Rub rails and coaming

Topsides- Epifanes Mono-urethane #3107

Interior –        “           “            ‘       #3140

Varnish – Epifanes woodfinish gloss – transom, woodfinish matte, side decks

Non- skid – Evercoat Skid-No-More, basic gray

Hardware – all stainless steel, 8″ cleat at bow, 6″ folding cleats at stern and midships

Steering – NFB SAFE-T II HELM, 12″ Stainless steel wheel

Compass – Ritchie F-50

Folding Seats- Make sure the legs are folded out at 90º, so they don’t collapse in use.

Removable parts – for access to inside of console, for rigging and repair-Forward panel- 4 machine screws ,Console door- lift off hinges

Aft seat and floorboards – chase for controls, etc.- 4 machine screws

Custom console with seat forward, fuel tank and battery in console, helm seat with storage, 2 folding jump seats.

3 rod holders port side of console

2018 Suzuki DF25ATL, very low hours

2017 Venture VB-1300 trailer

Custom cushions for helm seat and forward seat

This boat was used very little, and is in great shape. Presently stored in Chatham, MA. Sea trial can be arranged for a serious buyer.

More info, photos at http://www.oldwharf.com/boats-for-sale

• Listing ID: 45514